0
0
0

Rectifier with dimrot 30/350/t CLAMP 1.5 inches for heating elements в Якутске

Reviews:
(0)
  • Brand: ЧЗДА
  • Reward Points: 284
  • Availability: In Stock
28 430 ₽
Price in reward points: 28430
Buy in one click
Enter the phone number and we will call you back
Main specifications
All specifications
Maximum productivity, l/h: 0,5
Clamp connection: 1,5 inches
Column diameter, mm: 38
Column height, cm: 145
Dimrot: there is
Available Options
ADD TO ORDER
Warranty

All products are certified

Payment

Online payments Payment on delivery

Delivery

Pick-up points in all cities

A 1,5" distillation column with a dimrot 30/350/t for heating elements allows you to inexpensively obtain a wide range of excellent alcoholic beverages at a low price without specific knowledge and skills. There is no need to be afraid of esters, aldehydes and fusel oils getting into the finished product - it is enough to follow the instructions and bring the column into operation, when liquids with different evaporation temperatures are effectively separated by a rectifier.
Another reason to buy a 1,5-inch distillation column with a 30/350/t dimrot under the heating element is a well-thought-out design of the apparatus, it is easy to work with it and maintenance takes several times less time than with outdated moonshine stills. All parts of the moonshine still dock with each other using quick-detachable clamp connections, so the time for preparing for the distillation of mash or raw alcohol is reduced several times. A wide mouth with a diameter of 350 mm provides easy access for cleaning the distillation cube, and an internal groove around the circumference allows you to install a false bottom with a diameter of 350 mm to prevent sticking of thick mash. The cube capacity of 30 liters is optimal for operation without the help of friends or relatives. Additionally, in the lower part, already in the initial configuration, a ball drain valve is installed for convenient and safe removal of the stillage remaining after distillation.

The main advantages of a 1,5-inch rectifier with a dimrot 30/350/t for the installation of heating elements

The built-in reflux condenser with dimrot allows you to simultaneously strengthen the finished drink and clean it from fusel oils. Dimroth's refrigerator is made in the form of a spiral into which cold water is supplied. Evaporating alcohol vapors are cooled on contact with dimroth, while alcohol remains in the form of vapor, and low-boiling liquids (fusel oils) condense and flow down. Therefore, a 1,5-inch rectification column with a dimrot 30/350/t allows you to obtain absolutely pure alcohol with a strength of 96.6% without foreign odors. It is an ideal base for homemade vodkas, liqueurs and liqueurs.
Together with the rectifier, you should immediately order a Hoffmann clamp - it will allow you to smoothly regulate the water supply to the reflux condenser by adjusting the capacity of the rectification column. Also, regular wire nozzles will not be superfluous, you can use both steel and copper - different metals give their own nuances to the taste of the finished product. You don't have to think about possible defects - the manufacturer gives the rectifier a 1-year factory warranty. If there were hidden defects in some components that were not revealed by an internal check, then they will show themselves in a year.
A distinctive feature of this model is also a 2-inch KLAMP-type flange installed in the distillation cube for installing heating elements. Installation of heating elements will reduce the heating time of the primary wort and add convenience for precise regulation of the heating power during the rectification process. ChZDA products stand out in the Russian market for their high quality, reviews of the owners speak not only of the absence of defects, but also of convenient operation, when superhuman efforts are not required to obtain a perfectly pure drink. The main recommendations of the owners are to immediately order the necessary components to use the rectifier 100%.

Tags: distillation column, 30 liters, neck 350 mm, with dimrot, clamp, for heating elements

DIMENSIONS (in initial configuration)
Column diameter, mm 38
Column height, cm 145
Volume of the distillation cube, l 30
The diameter of the throat, mm 350
SPECIFICATIONS
Maximum productivity, l/h 0,5
Material Stainless steel
Maximum strength of the drink, % 96,6
Country of Origin Россия
Warranty of the factory 1 year
The height of the assembly, cm 190
EQUIPMENT (without additional options)
Clamp connection 1,5 inches
Dimrot there is
Diopter no
Drain cock there is
Induction bottom, mm 5
Installation for heating elements 2 inches
Reflux condenser there is
Safety valve no
Selection node there is
Set of silicone gaskets there is
Steam drum there is
Thermometer, pcs 3
Ethanol level device no
Hoses for water supply no
The faucet’s adapter for the hose no
The product’s passport/documentation there is
Packing box there is
Reviews (0)

Register to leave a review about the product and earn reward points!

There are no reviews for this product.

1. Primary product service

1. Inpack the Gorilych rectifier and remove all packaging materials.
2. Remove residual pre-treatment marks with water and detergent and rinse with clean water.
3. After filling the distillation cube with a small amount of pure water, collect the Gorilych rectifier and boil for 30 minutes. Dismantle the rectifier, drain the remaining water from the distillation cube and distillation unit.
Water supply
To use the column, it must be connected to the water supply. For this, water is supplied to the lower inlet of the aftercooler. and then from the top outlet of the aftercooler to the inlet of the reflux condenser (external spiral, movement of water towards the steam). From the outlet of the reflux condenser, heated water is discharged into the sewer or into a circulating tank, with the cooling system closed.

2. Regular product operation

Distillation
For distillation, collect the rectifier in the following configuration:
1. Short tsar 0.5 meters. It is possible not to use the drawer at all, and to install the head of the column immediately onto the cube. It is recommended to use a short drawer to protect the coils of the Dimroth refrigerator in the reflux condenser from pollution in the event of splashing mud. The drawbridge is used without filler.
2. The distillation occurs during the selection by liquid, ie steam tap closed, needle tap open
3. The hole of the temperature sensor in the sampling unit is either plugged, or there is a temperature sensor there as a plug, measurements from which are not made

The sequence of actions during distillation:
• Enable maximum cube heating. When the cube temperature reaches 80 degrees (the approximate value depends on the alcoholicity of the mash), turn on the water supply to the cooling system.
• Upon reaching the boiling temperature of the mash from the aftercooler, the selection of SS begins.
• 2-3% of “goals” are selected from the calculation for absolute alcohol.
• Switch selection to main tank
• Lead the selection of SS to “water”, ie to a temperature in the cube of 100 degrees Celsius, or by measuring with a hydrometer the strength of the SS at the outlet of the aftercooler.
 
Rectification process
Collect a distillation column with dimrot in the configuration to obtain the maximum alcohol purification (two half-shells 0.5 m with a full packing of both half-cups with a nozzle) or to obtain noble distillates (two half-cups 0.5 m with one half-cup packing of 50 cm). In this process, it makes sense to control the temperature in the cube and in the drawer (1/3 of the selection unit). Pour in crude alcohol and start heating. Set the heating power to maximum. The strength of the SS in the cube is recommended about 40%. A smaller fortress will necessitate the heating of more liquid and, consequently, the waste of more electricity and water for refrigerators. Moreover, the smaller strength of the SS does not lead to any advantages. The large SS fortress makes the distillation column difficult to work because at a fortress of more than 40%, azeotropes are formed, the separation of which is difficult to cope with in the normal rectification mode. Therefore, we degrade the quality of the final product. The search for the optimal operating mode of the column is as follows (it is performed once for each use case of the column - alcohol and noble distillates):
• Ensure that the fluid needle valve and the steam ball valve are closed.
• When the temperature reaches about 83 degrees Celsius, turn on the water supply to the cooling system.
• When misting the phlegm return tube, reduce the heating power to 1 kW
• The appearance of phlegm in the return tube means that you have entered rectification mode
• Adjust the water supply by rotating the needle valve at the inlet to the cooling system. Achieve water temperature at the outlet of the reflux condenser at 55 degrees Celsius
• Gradually increase the heating power and water supply to the cooling system. After each increase in heating power, allow the column to stabilize for one to two minutes.
• The goal is to find the power at which the choking of the column will begin. Column choking can be determined by the gurgling sound from the drawbridge, or by flooding the phlegm return tube.
• Reduce the power regulator by 5–7% from the power at which the column is flooded and obtain the desired optimum operating heating power.
 
Operation in rectification mode
• Put the column into operation
• Allow the column to stabilize for ten minutes. This stage is important not from the point of view of stabilization of the rectification process, but from the point of view of aligning fractions in the column head. No need to rush at this stage. To start effective separation, time is required for the initial heat and mass transfer.
• Next, open the needle tap on the fluid. Adjust the sampling rate to approximately one drop per second, or 200 ml per hour.
• Select “heads” in a volume of 10% of the absolute alcohol volume in the case of a maximum purification alcohol configuration. For noble distillates, select “heads” in a volume of about 6-7% and then select another 5% in separate containers for subsequent organoleptic analysis
• After selecting the heads, close the needle valve. Fix the temperature in the casing of the column. It will be needed in the future.
• Open the steam extraction ball valve. The steam selection rate depends on a number of factors; their detailed analysis is beyond the scope of this manual. The initial recommendation is as follows - initial flow rate settings - 1.2 liters per hour. The sampling speed can be determined using a measuring cylinder and a stopwatch. The main idea of determining the maximum sampling rate is that the temperature sensor in the column base should not change the readings upwards. If the sensor readings began to creep up, then the selection is too large and the rectification process is collapsing.
• When the temperature in the cube reaches 93 degrees, the selection should be reduced to 400 ml per hour.
• The selection is made until the temperature in the drawer changes by 0.1-1.5 degrees. For neutral alcohol, turn off the distillation cube heating at this moment and complete the operation. For noble distillates, substitute 30-40 ml jars for the exit of the aftercooler to collect pre-tail fractions and take another volume of alcohol in the equivalent of 2% absolute alcohol or about 10-15 minutes in time.
• Turn off the heat
• After cooling, disassemble the distillation column with dimrot and rinse the nodes of the column with warm water pressure
• For noble distillates the next day, dilute a few drops from each jar with headrests and pre-tail fractions with warm water to a fortress of 20 degrees and sniff. Pour smelling fractions into the finished product, pour fractions with an unnatural and unpleasant odor from the sewer, or use them for household needs (making a fire, for example).

* Regulatory indicators may vary depending on the type and indicators of the power of the heating source, temperature and intensity of cooling, temperature conditions, type and density of the fillers used for the packed distillation column.

Delivery of Gorilych products and related products.

You can buy any stills, brewing and distillation column "Gorilych" in our Internet-shop ChZDA and get your order in Chelyabinsk or in official representative offices in different Russian cities. The list of stores or points of delivery (PWZ) in the Chelyabinsk region is constantly expanding and the actual information on their addresses and office hours you can always find on the interactive map when ordering, or get the information you need from our consultants free by phone 8 (800) 775-90-83.

You choose your own delivery variant.

You can choose a convenient way of delivery of your stills "Gorilych" and other CHZDA products to Chelyabinsk. When ordering, specify the type of delivery and select any delivery point (PWZ) in the list or on the interactive map. We will take care of the rest.

Safe and cautious packing

Before shipping your order each kit of Gorilych stills is carefully inspected for any external defects, wrapped in bubble wrap, carefully and tightly packed in shipping carton and provided with all the necessary documents (bill of lading, passport, warranty card). During the whole process of delivery to Chelyabinsk region we always track the location of your order to notify the buyer on the arrival of the goods to receive them.

Up-to-date information on the location of the order

Due to advanced integration solutions in Chelyabinsk ZDA online store the buyer is always aware of where and at what stage his order is.

Online information in the personal cabinet about the order's progress at all stages;

convenient services on site to track the progress of the order;

Post and SMS-notification of changes in order status and readiness of goods for delivery;

Agreeing on a convenient time of delivery with the courier service.

Look first, pay later

Due to our courier service and long-term cooperation with reliable transportation companies, the customer in most cases (excluding Russian Post) can always open the package upon receipt of the order and make sure that the package is intact and the order is complete. And only if there are no comments, the buyer can pay for the received goods in the store, at the point of delivery or to the courier.


ChZDA store not only offers quality stills and distillers of its own production in Chelyabinsk region, but also the most comfortable, and most importantly, favorable conditions for the purchase in Chelyabinsk. You do not need to solve the question of payment when ordering products from our catalog because you can pay for the stillizer in any convenient way including:

Bank cards MIR, Visa, Mastercard, Maestro;

Payment through a bank branch;

Through a system of electronic money UMoneu;

Payment to the courier at delivery of the order;

Payment at the issuing point;

Payment by cash on delivery at the post office;

We also have unique ways of payment - by accumulated bonuses and a gift certificate. Take part in our promotional actions, accumulate bonus points and get our products with great discount.

 Absolute protection for online payments

All payments for CHZDA goods are made online through secure service JuMoneu, so you can be sure that all information with payment data is guaranteed to remain confidential and secure and can not be used by unauthorized persons: payment service JuMoneu is protected by PCI DSS - a standard Visa and Mastercard. Payments are credited on the same day.

 We wish you successful purchases!


Note: In order to improve the consumer qualities of the goods, changes may be made without additional approval. Possible changes do not affect the basic properties of the product.

You already watched